Hello,
our real-time system crashes after a couple of days with the following message at the console:
Scheduler Assertion Error: C0000005
Interrupt Disabled. Scheduler Enabled. If you have enabled serial console error
logging, detailed error info could be found in that console. Contact National Inst
ruments with the output of the serial console. Crash log
or memory dump cannot be created for this type of error.
We use the real-time software on a generic desktop PC
(ASUS Z87-Plus mainboard, i7-4770K, 4GB RAM, Intel SSD, 6 ethernet adapters)
with a FPGA board PCIe-7842R.
The first ethernet adapter is disabled,
the second adapter with DHCP enabled (192.168.0.xxx) serves as interface to a windows 7 based display computer,
adapter 3-6 use static IP addresses in a different subnet (192.168.200.xxx)
The communication between CPU and FPGA board uses Target-Host DMA and generates an interrupt every msec.
The system load is about 20%.
Any ideas to isolate the problem?
How can we enable serial console error logging?
Thanks for your help
Gerhard