In the above graph, the y-axis is calculated by the formula (1stsignal−4thsignal)/(3rdsignal−4thsignal)(1^{st} signal - 4^{th} signal) / (3^{rd} signal - 4^{th} signal), and the x-axis is determined by calculating the energy per pulse as the average output divided by the repetition rate. Then, using the formula F=E/(π×beam divergence2)F = E / (\pi \times \text{beam divergence}^2), the fluence is calculated. However, when measurements are taken through LabVIEW, we obtain a graph like the one above. Is it possible to convert this to the graph below in real-time