Clik here to view.
what happen if we use external clock to which doesn't support hardware timing?
Hi all, I have a card PCI6023E, which does not support hardware timing. I have an external clock of frequency 5kHz to PFI0. In the MAX, I setup a task for generating pulses sequence of frequency 1kHz...
View ArticleClik here to view.
Random values in TCP transmission
Hi I'm capturing a single grayscale frame (160x120) and sending it through TCP to a C-program. The issue is that before reading the actual pixel values in the console, the first 8 bytes consists of...
View Articletwo digital triggers to stop/start writing data to file
hello,I am currently trying to build a VI to use two digital rising edge triggers like posted pic to start and stop writing data to file .when start trigger is on,the data is written to file, It goes...
View ArticleArray Manipulation
We have one array which contains values and empty strings, what we are trying to do is if 2 or more values are coming continuously we want to concatenate them in one index by setting tab as delimiter,...
View Articlemore than one signal to the table
hi, can i input more than one signal that come from" wave chart " into build table block in the same time if yes >>>how ????
View ArticleClik here to view.
Unflatten from string or Type Cast ?
Hi. I am sending an array of 8-bit unsigned integer with the size 19203 from a TCP server in a c-program to a TCP client in LabVIEW. I have managed to receive the data as shown in the picture below....
View ArticleCalling Google Earth via Active X
Hi there! Can anyone kindly help me out in opening Google Earth window via LabVIEW Active X Control when GPS data stream appears as input? I also want to include my kml & network link file via...
View ArticleCalling Google Earth via Active X
Hi there! Can anyone kindly help me out in opening Google Earth window via LabVIEW Active X Control when GPS data stream appears as input? I also want to include my kml & network link file via...
View ArticleAir quality monitoring for 3D printer
Hi everyone.I'm trying to find sensors to monitor air quality which work with Labview. The 3D printer we are using has a risk of contaminating the air with particles, fumes etc. If I could monitor...
View ArticleUsing two analog outputs on the 6341 at the same time
Im trying to control two servo motors with the NI USB X 6341 at the same time. One pulse width cable is connected (servo 1) to AO0 and the other (servo 2) is connected to the AO1. Both servos are...
View ArticleClik here to view.
change color ramp size
Is it possible to change the size of the color ramp on a 3D contour plot? I feel like this is something that should be easy to do, but I can't figure out how. Specifically, I want to color ramp to be...
View ArticleField Point marked as invalid in project
I have posted a question regarding Field Point issues. If you have Field Point experience could you please check the post. I'm posting here to reach a broader audience. Thanks.
View Articleha sr04 ni6008 board
Dear all I have hs sr04 ultrasonic sensors and I am thinking to connect it in my ni6008 board.I read somewhere that I will need counter ports and NI6008 doesn't has this ports.My question is, It is...
View ArticleCalling a vi as a popup subvi
Hello again ~ new week new question. Can someone help me see this code? http://www.ni.com/example/26146/en/ I don't have an early enough version to see this. I am trying to use this logic in order to...
View ArticleClik here to view.
Actor Create Executable Anomally
Hi, I have a horrible feeling I'm going to look really stupid after posting this, but if I'm doing something really obvious and wrong then I'll take that over the struggle I'm currently having getting...
View ArticleLV load error code 9:VI version (13.0) is newer than LabVIEW version (11.0)
Hi there, We have one copy of LV2013 and several copies of LV2011 running. A LV project originally written in LV 2011 was opened by the LV2013, and then saved in LV2013. Now when LV 2011 tries to open...
View Articleexpress vi Title position
Hello, in the Express VI I can specify the custom VI title that will be finally placed in block diagram. Can I also change the positon of the label?The problem is, that if I want to have 2 lines label,...
View ArticleNode Comm Manager
Hello, Has anyone used the Node Comm Manager Library and can explain what it does? I think it is to set up a network connection amongst multiple devices but there doesn't seem to be much info...
View ArticleUniblitz
Hello I am new and still learning labview. I purchased a Uniblitz VMM-D3 sutter driver because it had a labview program only to learn that the program is only setup for one channel control. Can someone...
View ArticleCan I use LabVIEW VI's with US Digital USB4 DAQ?
Hi, I'm really new to using LabVIEW. I was asked to create a test that measures and records the angular position of two incremental encoders (quadtrature) and outputs this data to a file. Someone...
View Article