Serial Communication with myRio
Hye.Im trying to connect GD02Rev2.0 (driver for the g15 cube servo) with myRio. I have to connect the Rx Tx and Control pin of the driver to the myRio to run the motor. It seems like i have to create...
View ArticleClik here to view.
Modern ActiveX Browser Options
Hey all. So I've always struggled with getting an ActiveX browser to work in my actual programs. Generally I run the NI provided example and sure enough it works on NI's site, but then I go to use it...
View ArticleHow can I add timer function?
Hi. I have a question.I made a labview program which can do PID contoll.But I don`t know how can add timer function. 1.When temperature is higher than set point, Timer have to be started. 2.After time...
View ArticleProducer Consumer Data Acquisition Multiple Channels
Hello all, I am a student at university working on my senior project and am having some troubles using LabView. I am currently trying to implement a producer consumer format, tdms writing program for...
View ArticleError 16 in Application Builder
I get the following error when I try to build an application in Labview 2016 using the Application Builder addon: "Error 16 occurred at CodeSignAPI.lvlib:Get Signing Error String.vi" I know the code...
View ArticleSPI data setup
Hello Everyone, I am trying to make an SPI program (connected to DAQMx) which has 3 function mode (CW, PMCW, and FMCW). In CW and FMCW mode, when I press transmit, the SPI will send 5 words and then...
View ArticleSelecting Feeds in NIPM
Hi All, If I select the "Feed" as Category in NI Package Manager, I am not able to see anything listed though there are feeds added to NIPM. Please let me know why the feeds are not listed or if I have...
View ArticleFPGA: Is waveform graph or chart not available in fpga?
I was trying to use waveform graph to display data in my fpga project. The source data type is fxp, however, when I connected the source to the waveform graph, it still shows DBL, which is not...
View ArticleVPN connection to RT target
Hello Is it possible to directly connect/build and deploy to a remote RT CompactRIO 9063 target using a VPN without having a computer connected to the CRIO on the remote end using following structure?...
View ArticleRe: Re : how to run an USB-TC?
hi sir,i do the programe for USB-TC, its run in my computer and reading are shown. when i try to run in my target system, the reading are didn't shown. i install Labview RUN-Time Engine in Target...
View ArticleTemperature reading from Keithley 6517B using LabVIEW drivers
Hello there, this is my first post and as the name suggests, I am a rookie when it comes to both LabVIEW and Keithley 6517B so if this is a silly question, please go easy on me. I am trying to get a...
View ArticleNI-CAN 17.0 Functions not showing up in Functions Pallette
I am running LabVIEW 2016 and I have installed the NI-CAN 17.0. The CAN functions are not showing up in my functions palette? I have tried to go back and install NI-CAN 16.0, but it won't install now...
View Article2d arrays in xy graph
Hello all, i have analog ( multiple channels - 2d Array ) and counter data ( single channel - 1 d array). I need to plot it on XY graph. so i used a for loop for auto indexing and plotted on XY graph...
View ArticleHelp with identification of CLD-like problem
Hello Everybody,Sorry if this is slightly off topic but this was the best I could find for my question. I recently encountered a code that is very similar to the available CLD Sample Exams in front...
View ArticleUpdating exe for distribuiton
Hello,I'm trying to update an exe and I'm not sure where I'm going wrong. I have already built and distributed the application to the PXI's. I have updated a file and want to redistribute the new...
View ArticleLabVIEW RT-Linux GUI and other advice
I have developed with LabVIEW RT in the past where the target was based in VxWorks, or in Phar Lap ETS. These systems were essentially headless self contained 'black boxes' where a client would connect...
View ArticleLOGIN in APPLICATION (EXE)
Good afternoon, I wanted to know if someone could help me with the following: I have created an executable in labview (Application (EXE)) and I wanted that when this executable is started, I...
View ArticleImage stored in VI - large filesize
Hi, I am using Labview with the Vision Developement module. In one of my projects I have an Image Display element on the frontpanel. Whenever I open the VI, an old image is shown in the Image Display....
View ArticleHelp Needed! Constant Crashing!
Hello Everyone! Thank you in advance for any help or advice contributed! Currently we have a program, AMS, that is used to monitor various measurements and data on a marine vessel. The program has...
View ArticleRun a external code in cRIO
To run a code made in C or C++ on Linux Real Time (cRIO 9036), I must do it using shared libraries? Could I do it using other method? If there is other method, please let me know because I have read...
View Article
