Error -200279 apt
I have a Thorlabs APT DC Serve controller rotating a polarizer. I want to roate it through 360 degrees one degree at a time and then measure the voltage output from the DAQ and output the angle and...
View ArticleDoes anyone have an example on pickering 40-575 matrix to set a pattern to...
Does anyone have an example on pickering 40-575 matrix to set a pattern to close multiple relays?I try using a for loop to set one relay at one time but it seen to open the closed relay when setting...
View ArticleTabs not matching Enum
Good evening, I'm a bit perplexed by something that's probably incredibly easy.... I created a tab structure, and added a third tab. Each tab was uniquely named. I then went to the block diagram to...
View ArticleLabview 2013 SNPX / SNP GE Fanuc
Hello, Just wondering if anyone can point me in the right direction for establishing a connection between LabView (2013) and GE FANUC PLC CPU 331. The (attempted) connection is made as...
View ArticleCounting edges with external Counter clock
Hello,I have a question regarding edge counting with Counters.Looking here : http://zone.ni.com/reference/en-XX/help/370466V-01/TOC52.htm, I do not understand how I can count edges when the External...
View Articlechatter monitor
Hi All, being a LV newbie, I have a question on building a chatter monitoring system. Basically, I have a USB 6210, monitoring various DC voltages. What I need to do is detect a dropout that is greater...
View ArticleHow can I take a picture of a camera output on the Front panel
Hi all, I've been fighting this one for a while, But I have a DataRay WinCamD CCD image in my front panel, I need a way of saving that image to a file. I've been crawling through NI Vision and IMAQ...
View ArticleConnecting to Device in LabVIEW 2010
Hello there, I am attempting to communicate with an STG 2008 Multichannel Stimulator using LabVIEW 2010. We have the code essentially finished but we have been unable to discover connectivity between...
View ArticleCan somebody fix my corrupted subvi, error "Fatal Internal Error" "objheap.cpp"
Hello, I have been strugling to open this file after a reboot due to not responding computer. The file is a part a larger library however, this is the part that is not responding and giving "Fatal...
View ArticleFormatting a spreadsheet file different ways
Is there a way to have multiple formatting methods for a Write to Spreadhseet command? Like I have an array that I want to have specific columns formatted different ways.Or can you only format the...
View ArticleWhy does Build Application vi work in development environment but not in...
Hello, I have an application ("A") that I am trying to build using another application ("BuildA"). I can create an application for A manually from its project using the Build Specification, and it...
View Articleinstaller is requesting old media
I have a slight twist on a seemingly common issue... I've found many many posts about additional installers requesting previous media to complete a built but none of them answers my exact situation.My...
View ArticleSaving a Time Stamp In Memory and retrieving it
I would like to store the time stamp in Flash memory. The memory is 8 bit. So how would I store it in byte format to the memory and retrieve the memory, then put it back together to get the time stamp...
View Articledata to time stamp
Hi.I have a problem, I have the time data in one excel file, one cell contains the value that correspond to the hours, another the minutes, another the seconds, I want to get this data in labview in...
View ArticlePID position control : guide me
Dear memberI want to built a PID position control i read the DC position through potentiometer with -128 to 127 [full 360 degree] so the input to the pid is voltage range between -128 to 127 the input...
View ArticleDLL
Hello, I am trying to create VIs from a C/C++ dll.I have got the dll and the corresponding Header file.But when I try to use import wizard, it shows me all the functions in the DLL but it cannot find...
View ArticleMis-rotation with Newport PR50PP rotation stage controlled by SMC100PP motor...
Hi everyone, This is a long shot, but I'm going to explain my problem and hope that someone has seen this issue before. PROBLEM:I am using a Newport PR50PP rotation stage that is controlled by a...
View ArticleClik here to view.
Tab order within tab control
Hi all, I have found in the help and other posts that you set the tabbing order withing a tab control by right clicking the page and selected redorder controls in page. I am using Labview 8.0 and for...
View Articlehow to achieve high sample rate using two DMM 4065 simultaneously or just one ?
Hello all, I have been working on collecting data using two DMM 4065 (for current and voltage) which I recently purchased from NI. These two DMMs along with a few other modules (including a...
View Article